Cortalk RMU5 Generic - Skywave Isatm2 M Satellite; Skywave Isatdatapro Satellite; Figure 43 Skywave DMR-800 Transceiver

MOBILTEX® DATA LTD.
TITLE:
RMU5 Generic Installation and Configuration Guide
Calgary, Alberta
DOCUMENT NO.:
RMU5-MAN-001
SHEET:
48 of 69
REV:
1.10
application. The specification for the data format is also available in a separate document for use in custom host
applications.
The RMU3-S Iridium modem attaches to a communications expansion adapter board that also provides power to the
unit. The RMU3-S Iridium modem is enclosed in a water-tight housing with the appropriate antenna built onto the
enclosure.
6.1.7 Skywave IsatM2M Satellite
The RMU5 can communicate to the Mobiltex corView web application over the Skywave IsatM2M satellite system
when the RMU5 is equipped with a Skywave DMR-800 satellite transceiver (see Figure 43). The RMU5 must also be
fitted with a DRI1-SKYSAT interface board.
Figure 43 Skywave DMR-800 Transceiver
For further information on configuring an RMU5 for use with the Skywave DMR-800, refer to Mobiltex document
RMU5-MAN-002, entitled “RMU5-corView Installation and Configuration Guide”.
6.1.8 Skywave IsatDataPro Satellite
The RMU5 can communicate to the Mobiltex corView web application over the Skywave IsatDataPro satellite system
when the RMU5 is equipped with a Skywave IDP-680 satellite transceiver (see Figure 43). The RMU5 must also be
fitted with a DRI1-SKYSAT interface board.