TITLE:
RMU5 Generic Installation and Configuration Guide
DOCUMENT NO.:
RMU5-MAN-001
DC channel 50/60Hz rejection: 75dB typical
Digital Input(DIN): Optically isolated (+/-3 to 30VDC activation)
Sensor Bus: RS-485 plus 1PPS, interrupt synch, and +12V
Serial Communications: 1 RS-232, 1 RS-485
USB Host: 1 non-dedicated, user accessible port
GPS-Synchronized Interruption Option Board:
Operating temperature range: -40 to +85C
Installation: Factory or qualified field technician
UTC Reference offset adjustment: -2000 to +3000ms in 1ms steps
Timing accuracy (AC line sync disabled): +/-0.5 ms
Timing accuracy (AC line sync enabled): +8.8/-0.5 ms
Off Time: 1 – 60,000ms in 1ms steps
Cycle Time: 2 – 60,000ms in 1ms steps
GPS Receiver: Internal 20 channel
GPS Antenna: External through-hole mount with SMA
Datalog Storage Option Board:
Storage Memory Type: USB 2.0 embedded drive card
Storage Memory Size: Available in 512MB, 1GB, 2GB, 4GB, 8GB
PERMANENTLY CONNECTED EQUIPMENT requires special considerations to satisfy the CEC and the Canadian
deviations in the standard, including overcurrent and fault protection as required.
Technical assistance may be obtained from:
Mobiltex Data Ltd.
3640-26
th
Street NE
Calgary, AB T1Y 4T7
Canada
Tel: (403)291-2770
Web: http://www.mobiltex.com
To Previous Page
Loading...
