TITLE:
RMU5 Generic Installation and Configuration Guide
DOCUMENT NO.:
RMU5-MAN-001
Figure 37 RMU5 Configuration – RS-485/MODBUS Port Properties
The “RS-485/MODBUS Port” properties page contains the following fields:
1. Notes. This is a free form text field where the user can enter any pertinent information about the configuration in
the page. This field is purely informational and has no effect on the operation of the RMU5.
2. Communications. The RS-232 UART communications properties are set in this group. The default button, when
clicked, will set the parameters to nominal values used with the MODBUS protocol.
3. MODBUS Address. This parameter sets the MODBUS slave address.
To Next Page
Loading...
