TITLE:
RMU5 Generic Installation and Configuration Guide
DOCUMENT NO.:
RMU5-MAN-001
5.2.1.2 Ethernet Configuration Properties
The next tab in the configuration dialog is the “Ethernet Port” settings:
Figure 34 RMU5 Configuration -- Ethernet Properties
The “System” properties page contains the following fields:
1. Notes. This is a free form text field where the user can enter any pertinent information about the configuration in
the page. This field is purely informational and has no effect on the operation of the RMU5.
2. Function of this Port. Several features may be enabled over Ethernet. The first is the MODBUS slave mode. This
enables a MODBUS TCP server on port 502. The second is RMUSETUP, which allows remote configuration from
RMUSetup via an Ethernet connection. The final option is the “Web Server” that enables a web server page on
TCP port 80 which contains the current RMU5 status information. In addition to the three options listed, the
Ethernet port also supports an FTP server and Telnet server that are always enabled. Access to these features
requires authentication based on the parameters in the “Accounts” settings tab.
To Next Page
Loading...
