TITLE:
RMU5 Generic Installation and Configuration Guide
DOCUMENT NO.:
RMU5-MAN-001
5 Configuration
5.1 Software Installation
Initial configuration of the RMU5 is performed by attaching the RMU5 to a suitably equipped PC via a USB connection.
The PC must be running Windows XP SP3 or higher. A driver CD, containing “rmu5.inf”, is provided by Mobiltex for
the USB function. Ensure that this driver CD is available prior to attaching the USB cable between the PC and the
RMU5. Before starting this process, log into the PC using an account with administrator privileges, otherwise
the driver install will fail.
To install the configuration application and driver software, insert the CD that came with the configuration interface into
the CD drive on the PC. If “autorun” is enabled on the PC, the following screen in Figure 18 will appear.
If “autorun” is not enabled, or the contents of the CD have been copied to a local directory, use Windows Explorer to
navigate to the CD drive or the directory containing the installation software. Double-click on the
“RMU5INSTALLER.exe” application. The dialog on Figure 18 will appear.
Figure 18 RMU2Installer Dialog
5.1.1 Configuration Application Software
Click on the “Install RMU5 Configuration Applications” button to start the application installer. The following dialog
may appear, click the “Run” button to continue:
To Next Page
Loading...