TITLE:
RMU5 Generic Installation and Configuration Guide
DOCUMENT NO.:
RMU5-MAN-001
6.2 Ethernet Services
When the RMU5 is attached to a TCP/IP network, several remote control/monitoring options become available as a
result. These options are provided via standard Internet server applications as follows.
6.2.1 Web Server
The RMU5 can be configured to run a web server on the standard TCP port 80 for the purposes of status display.
Information about the RMU5 I/O points is shown, as well as other status information. To access this information, the
user must supply a username and password the first time the page is accessed. The username and password can be
anyone of the three system accounts defined in the RMUSetup configuration.
Figure 56 RMU5 Web Server Page
To Next Page
Loading...
