TITLE:
RMU5 Generic Installation and Configuration Guide
DOCUMENT NO.:
RMU5-MAN-001
5.2.1.1 System Configuration Properties
The following dialog with multiple edit tabs is presented, with the first page containing global system parameters:
Figure 33 RMU5 Configuration -- System Properties
The “System” properties page contains the following fields:
1. RMU Serial Number. This is a read-only field with the 32-bit unique electronic serial number that is hard coded
into the system microprocessor. This field is only valid when the configuration has been read back from the RMU5.
2. RMU Version. This read-only field contains the version number of the RMU5 application. An implied decimal
point is not shown. For example, a value of 102 indicates an application version of 1.02.
3. RMU Name. This is a free form text field that can be set to whatever the user desires, but typically it should be
some meaningful name related to the site where the RMU5 is installed. This information is printed into the RMU5
log files on startup. The information is also used on web page displays.
4. User Notes. This is a free form text field that can be set to whatever the user desires. The information is printed
into the RMU5 log files on startup.
5. Event Log Size. This field is used to limit the maximum size of individual log files on the RMU5. Once a log file
exceeds this size, it is closed and a new file is started.
6. Data Log Size. This field is used to limit the maximum size of individual data log files on the RMU5. Once a data
log file exceeds this size, it is closed and a new file is started.
To Next Page
Loading...
