52
STARTING A SELF CLEAN CYCLE
1. Empty the oven and close the oven door.
2. Press Self Clean. The Self Clean icon and default cycle time "3" (3.5 hours )
appear in the display.
3. Double Oven: Press 1 or 2 to select upper or lower oven.
4. Press 1, 2, or 3 to select the cleaning duration 2:00, 3:00, or 3:30 (hours).
5. (Optional) Press Start Time and enter the desired start time to set a del ay
start time if desire.
6. Press START. The oven door locks automatically and Self Clean begins.
7. After Self Clean has ended and the oven has completely cooled, remove
ash with a damp cloth.
NOTE:
• When the oven has cooled down to a safe temperature, the oven
door will unlock.
• To avoid breaking the glass, do not apply a cool, damp cloth to the
inner door glass before it has cooled completely.
• After the Self-Clean Cycle
- You may notice some white ash in the oven. Wipe it off with a
damp cloth after the oven cools. These deposits are usually a
salt residue that cannot be removed by the clean cycle.
- Fine lines may appear in the porcelain because it went through
heating and cooling. This is normal and will not affect
performance.
• A 24-hour wait is recommended before starting the next Self-Clean
cycle.
To Next Page
Loading...
Need help?
General
