54
5. Lift door up and out until the hinge arms are clear of the slots. Set the
To Replace the Oven Door
oven door(s) aside on a covered work surface. Do not lay the oven door
on its handle. Doing so may cause dents or scratches.
IMPORTANT: Do not lift door by door handle.
1. Verify that the hinge arms are extending forward.
2. Firmly grasp both sides of the door.
3. With the door at the same angle as the removal position, which is
approximately five degrees or 2-3 inches from being fully closed, seat the
indentation of the hinge arms into the bottom edge of the hinge slots.
IMPORTANT: The notch in the hinge arms must hook on the lip at the
bottom of the slot.
To Next Page
Loading...
