COX CXO300 - Wireless Fob Security; Safety Label Identification

2.0 OUTBOARD SAFETY 15
CXO300 OWNER’S MANUAL
ON/OFF
START
 Figure: False MOB Recovery
steps
Taking control in a false
MOB event
1 In the event of a false triggering
of the MOB protection, firstly
return the outboard control
lever(s) to the neutral position.
2 Press and release the ON/OFF
button on the control panel to
cycle the ignition on (2a).
3 Press and hold each arrow
button on the control panel for
2 seconds at a time to send the
start signal to the corresponding
outboard (3a-3d)
 WARNING
Always keep the master fob on your person
2.4 WARNING LABELS
Please note the following safety labels placed on your outboard.
3B
3A
2A
3C
3D
AWARENESS OF
VESSEL LOAD