6.0 MAINTENANCE
6.0 MAINTENANCE
74
CXO300 OWNER’S MANUAL
6.4.12 INSPECTING ELECTRICAL WIRING
Your outboard(s) system includes various electronic control systems which rely on robust electrical
signals to operate correctly. Issues such as damaged wires, split insulation, corrosion, loose connectors
and other damage can cause the outboard(s) to behave erratically with difficulty in correct diagnosis.
Remove the upper cowling and visually inspect the electrical harnesses and wiring regularly for any
damage or loose fasteners. If in any doubt contact an authorized Cox Powertrain dealer for further advice.
NOTE
Do not physically push or pull any harnesses or connectors during inspection.
To Next Page
Loading...
