6.0 MAINTENANCE 57
CXO300 OWNER’S MANUAL
6.3 GREASE POINTS
Certain areas of your outboard(s) require regular application of grease for best performance and longevity.
Refer to the maintenance schedule for greasing intervals. Always use a water-resistant marine grade
grease. Contact an authorized Cox Powertrain dealer for product recommendations.
Adding grease:
1 Prepare a hand-operated grease gun fitted with an extension hose to suit a standard
grease nipple.
2 Tilt the outboard(s) out fully.
3 Engage the tilt locks and tilt the outboard(s) in slightly to bring it to rest
on the tilt locks.
4 Fit the extension hose over the grease nipple and inject grease until grease starts to flow out
of the bleed hole next to the grease nipple.
5 Remove the extension hose and wipe clean.
6 Tilt the outboard(s) fully up, disengage the tilt locks then tilt the outboard(s) back down
Figure: Grease point on PTT unit
WARNING
Avoid passing underneath the outboard(s) when tilted, even with a locked tilt support in place.
1
4
2
3
To Next Page
Loading...
