3.0 TECHNICAL SPECIFICATION
3.0 TECHNICAL SPECIFICATION
16
CXO300 OWNER’S MANUAL
Overview
Maximum power operating range 3700-4000 rpm
Warm idle speed in neutral 750 rpm
Rated propeller shaft power 224 kW (300 bhp)
Peak powerhead torque 650 Nm (479 lb-ft)
Outboard dry weight 380 kg (838 lb)
Rigging
Mounting pitch 762 mm (30")
Mounting bolts 6x M12 A4-80
Steering angle
+/- 30˚
Tilt and Trim Hydraulic power tilt-trim
Trim cylinder range, relative to vertical -5° to +16° on a 14° transom
Tilt cylinder range, relative to vertical +16° to +69° on a 14° transom
Battery type 12 V, AGM
Minimum battery capacity 1150 CCA, 230 Ah
Powerhead
Design 4-stroke DOHC 32-valve V8
Bore x stroke 84.0 x 98.5 mm (3.3 x 3.9”)
Total displacement 4367 cm³ (266 in³)
Compression ratio 16.0:1
Aspiration Twin turbochargers
Cooling Raw water, anode protected
Temperature control Thermostats, oil cooler (optional)
Fuelling system High-pressure common rail
Fuel type Ultra-low sulphur diesel
Fuel specification EN 590, ASTM D975 No.2-D
Powerhead oil Min standard - Fully Synthetic API CI-4 / SAE 10W40 or 5W40’
Powerhead oil capacity 11 L (11.6 US qt)
Transmission
Design Spiral bevel gear drive
Gear ratio options 1.23 (27/22) / 1.46 (19/13)
Maximum propeller shaft speed 3259 rpm (1.23 ratio) 2737 rpm (1.46 ratio)
Propeller shaft output 31.75 mm (1.25”) shaft, 19 tooth spline
Maximum propeller diameter 406.4 mm (16”)
Gear oil SAE 80W90, API GL-5
Gear oil capacity 1.9 L (2.0 US qt)
To Next Page
Loading...
