COX CXO300 - Flushing Safety and Fluid Cautions

5.0 OPERATION 51
CXO300 OWNER’S MANUAL
 Figure: Locating the flush points
 CAUTION
Do not run the powerhead while flushing. Water pump failure and severe outboard damage can result.
 CAUTION
Ensure all flush plugs are re-installed and tightened with seals in place
prior to operating your outboard(s).
A missing or loose flush plug will result in overheating, limited performance
and possible outboard damage or failure.
 CAUTION
Your outboard’s warranty may be invalidated if damage is caused by the use of flushing additives.
Flush with fresh water only.
Aft flush point
Fore flush point