7.0 STORAGE
7.0 STORAGE
80
CXO300 OWNER’S MANUAL
8 Remove your propeller and store separately. Coat the exposed propeller shaft with a marine rust
preventative product. Contact an authorized Cox Powertrain dealer for advice and recommendations.
9 Identify and follow any storage instructions for other components in your installation such as your
steering and controls gear, other electronic components, any bilge pumps etc.
NOTE
Your outboard should be stored in an environment with good ventilation, preferably away from salty
air.
If storing with the vessel on-water, the outboard(s) should be tilted as far as possible so that the
transmission clears the waterline.
If storing out of water, the preferred orientation for storage is vertical, so that any water or moisture
build-up can drain naturally.
To Next Page
Loading...
