CARBURETOR FL-5
CARBURETOR REMOVAL
Remove the helmet box.
Remove the air filter container.
Put out the cold start valve.
Remove the throttle control cable.
Remove the fuel line, the carburetor heating and
the oil hose from the carburetor.
Release the pipe clamp from the air cleaner snorkel
and remove the carburetor.
Drained fuel has to be properly
disposed.
CHECKING THE CHOKE
Check the cables if they are conductive.
The resistance should be below 35 Ohm.
Remove and let cool down the carburetor.
Check the additional air bore (s. picture).
ok: when you are able to blow in
not ok:when you are not able to blow in.
To Next Page
