CPI ARAGON GP - Assembling the Crankcase

CRANK DRIVE / CRANKCASE / CRANKSHAFT CR-11
ASSEMBLING THE
CRANKCASE
Mount the crankshaft bearing in the left
crankcase.
The crankcase shall be heated
up to approx. 120°C prior to
driving in the bearing. Use
temperature indicating chalk.
Special tool: TKF900120
Mount the crankshaft bearing in the right
crankcase.
The crankcase shall be heated
up to approx. 120°C prior to
driving in the bearing. Use
temperature indicating chalk.
Special tool: TKF900120
Heat up the crankcase half with the
mounted bearing to approx. 120°C.
Mount the crankshaft in the bearing