VARIOMATIC TRANSMISSION VT-5
ROLLER WEIGHTS
MEASURING
Measure the diameter of the roller
weights.
Standard value: 15 mm
Measure the height of the roller weight.
Standard value: 12 mm
ROLLER WEIGHTS CHECK
Check the roller weights for wear and
damage. Replace damaged or excessively
worn roller weights.
Check the roller weights for roundness. If
roller weights are flatted too much they
shall be replaced on the technician’s own
discretion.
Excessively worn, damaged, or
flatted roller weights have
negative effect on the proper
functioning of the continuously variable
belt transmission. The torque / power
ratio is no longer given particularly upon
the vehicle acceleration or during
downhill driving.
To Next Page
Loading...
