VARIOMATIC TRANSMISSION VT-9
Check the lock pins and the guide and the
guide way in the movable pulley for
damage or scoring.
REASSEMBLY
Assembly the clutch in reverse order.
Grease all movable parts
upon the reassembly of the
clutch in order to ensure the free
movement of the clutch component
parts. Check the functioning of the
clutch (i.e. its free movement)
subsequent to the reassembly.
TRANSMISSION
Remove the transmission output shaft and
the intermediate shaft.
When removing the inter-
mediate shaft, pay attention to
the thrust washer.
It must not get lost upon the
removal of the intermediate
shaft.
FINAL DRIVE
Check all gears and shafts for wear and
damage.
Oil filling capacity:
100 ml SAE 80/90 when refilling
120 ml after disassembly and
reassembly
To Next Page
Loading...
