Need help?Do you have a question about the CPN MC3 ELITE and is the answer not in the manual?
General| Brand | CPN |
|---|---|
| Model | MC3 ELITE |
| Category | Measuring Instruments |
| Language | English |
Details the components and standard accessories included with the MC-3 Elite gauge.
Covers basic gauge operation from powering on to taking a measurement.
Instructions on how to charge the gauge's NiMH batteries.
Steps for powering on the gauge and understanding self-test results.
Guide to changing measurement units (PCF, kg/m³, g/cc).
How to configure the duration of measurement tests.
Explains the automatic depth indicator and manual mode.
Procedure for performing daily standard counts for accuracy.
Recover and review the most recent gauge test results.
Adjustments for density, moisture, and trench corrections.
Enables automatic scrolling of test results on the display.
Enables or disables the LCD backlight for night viewing.
Checks gauge components like battery, voltage, and sensors.
Monitors long-term electronic drift of the gauge.
Validates the normal operation of the gauge electronics.
Calibrates the gauge's depth sensors.
View the last 30 standard counts and their dates.
Configure default units for measurements.
Field calibration to adjust factory settings for local materials.
For measuring thin overlay density on asphalt or concrete.
Enter and store calibration constants for density and moisture.
Basics of atomic structure, protons, neutrons, electrons.
Elements with same protons but different neutrons.
Properties of unstable isotopes and radioactive decay.
Alpha, Beta, Neutron, and Gamma radiation characteristics.
Time for radioactive material to decay by half.
Definitions of Roentgen, RAD, Rem, and Quality Factor.
Annual dose from natural sources like cosmic rays and earth.
Keep radiation exposure As Low As Reasonably Achievable.
Methods to reduce dose: Time, Distance, Shielding.
NRC/state agency control, obtaining licenses.
Steps for periodically testing sealed radioactive sources.
Dosimetry requirements for operators.
Mandatory training for handling radioactive materials.
General awareness and regulations for transporting hazardous materials.
Proper shipping name and Type A package requirements.
Radioactive labels and package marking requirements.
Required documentation and accident response procedures.
Pre-shipment inspection and securing the package.
How Cs-137 and GM detectors measure density.
How Am-241:Be and He-3 tubes measure moisture.
Depth of measurement for density and moisture.
Calculating calibration constants for density and moisture.
Detailed steps for performing a leak test.
Maintenance for radiation sources and bottom plate.
Inspecting the handle assembly for wear.
Identifying and resolving common gauge problems.
Key technical data and standards for the MC-3 Elite gauge.
Example of shipping documentation.
Information for responding to transportation accidents.
Radiation measurements at various points around the gauge.
To Next Page