Where:
M count = Moisture count
D Count = Density count
MCR = Moisture count ratio (M Count/MS)
DCR = Density count ratio (D Count/DS)
WD = Wet density
%MA = Percent Compaction ((WD/Max Dens.) X 100)
%Void = Percent air voids (100-%MA)
Moisture = Moisture density in PCF, Kg/m3 or gcc depending on
the unit selected
DD = Dry density (WD- Moisture)
% Mois. = Percent moisture ((Moisture/DD) X 100)
% PR = Percent Proctor ((DD/PR) X 100)
To Next Page
Loading...