Craftsman 113.226421 - Operating the ON-OFF Switch; Locking Feature and Safe Operation

_e::On_Off::Swit_h I:.has::a: ocking feat ure.
HIS:: :FEATURE:iS_:]NTENDED TO: HELP
REVENT UNAUTHORIZED :AND POSSIBLY
_EI:BY CHILDREN AND
sander
: ON,:insert key into switch.
NOTE: KeyiS made of yellow plastic; :locate in
loose parts bag,
2,: insertfinger under switch lever and pull end
of Switch out,
± i i iii i ,,
3, To turn machine "OFF" ..... PUSH lever in,
NEVER LEAVE THE MACHINE UNATTENDED
UNTIL IT HAS COME TO A COMPLETE STOP.
---
i1_i ,r_ qi ,, . j i . _ _ ._ .
4. To lock switch in OFF position.., hold
switch IN with one hand ..REMOVE key
with other hand.
WARNING: FOR YOUR OWN SAFETY, ALWAYS
LOCK THE SWITCH "OFF" WHEN MACHINE IS
NOT IN USE... REMOVE KEY AND KEEP IT IN A
SAFE PLACE... ALSO... IN THE EVENT OF A
POWER FAILURE (ALL OF YOUR LIGHTS GO
OUT) TURN SWITCH OFF... REMOVE THE KEY
AND STORE IT REMOTE FROM BELT AND DISC
SANDER, THIS IWlLL PREVENT THE MACHINE
FROM STARTING UP AGAIN WHEN THE
POWER COMES BACK ON.
14