BevMax_Media_Programming_10_6_10 Page 101 of 106
08/15/2013
SELECTION WILL NOT VEND
Selection will not vend.
Vend price set
incorrectly.
Check price and reset if
necessary.
Insufficient credit.
Check price, ensure
credit is equal to or
greater.
Product and gate mis-
matched.
Check for correct
product set up.
Gate sticking.
Move product away from gate and do a
test vend to check gate operation.
Check for bent pins in gate assy.
Dirty / worn slide assy.
Clean, check for flash,
lubricate, replace as
needed.
Loose connections.
Check harness connections
at I/O board, Atlas board, &
motors.
Defective Plunger arm.
Use Test Menu, Port & Cup
Sensor to check Plunger arm,
replace as needed.
Defective harness. Replace harness.
Defective I/O or atlas
board.
Replace.
To Next Page
Loading...
