Crane BEVMAX 6 - Page 106

BevMax_Media_Programming_10_6_10 Page 104 of 106
08/15/2013
MACHINE NOT COOLING
Machine not cooling.
Dirty or clogged
condenser.
Clean.
Defective thermostat /
temp semsor.
Replace.
Restricted airflow.
Check rear screen for
obstructions. Ensure rear of
cabinet is at least 4” (10cm) away
from wall.
Machine in direct
sunlight.
Move machine.
Faulty product seal. Replace.
Condenser fan or
evaporator fan not
running.
Check blade for
obstruction. Check fan
circuit.
Evaporator is iced up.
Check for air leaks or
clogged condensate
drain line.