EasyManua.ls Logo

Crane BEVMAX 6 - Page 19

Crane BEVMAX 6
106 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BevMax_Media_Programming_10_6_10 Page 17 of 106 08/15/2013
ErrorDescription ProbableCausePossibleSolutions
Factory Init. An attempt to restore factory default settings has Power down, power up, try again.
been unsuccessful. Power down, remove monetary devices and try again.
Replace the control board and reset.
Card Reader No Comms. The control board is not able to communicate with Check connections for the card reader.
the card reader. Check for damage to the harness (cut, pinched, etc.).
Replace the card reader.
Reset the control board.
Replace the control board.
Card Reader Comms Error. The control board is not communicating with the Check the connections and harness for damage.
Card reader. Check the settings on the board and on the reader.
Replace the reader.
Reset and/or replace the board.
Bill Validator No Comms. The control board is not communicating with the Check the connections and settings for the validator.
bill validator. Replace the harness.
Replace the validator.
Bill Validator Motor Error. The validator has reported an error to a drive motor Check for a broken belt or blockage.
within the validator. Replace the bill validator.
Bill Validator Sensor Error. The validator has reported an error to a sensor within Check for a sensor blockage.
the validator. Replace the bill validator.
Bill Validator ROM Erro. An error has been detected in a main chip in the Replace the bill validator.
Validator.
Bill Validator Acceptor A jam in the bill path has been detected. Check the bill path for items that are blocking sensors.
Jammed. Check to see that the bill path gates are not open.
Replace the bill validator.
Bill Validator Stacker Error. An error has been reported concerning the bill box. Check the bill box to be mounted to the validator
properly.
Replace the bill box.
Replace the bill validator.
Bill Validator Stacker Full. The bill validator is reporting that the bill box is full Check for bills and remove them.
of bills. Replace the bill box.
Replace the bill validator.

Table of Contents

Related product manuals