BevMax_Media_Programming_10_6_10 Page 60 of 106
08/15/2013
Press the 2 Key will bring up a screen stating that this unit is currently
unassigned – please log in with a higher PIN entry to assign this unit.
Telemetry
This unit is currently unassigned.
Please log in with a higher level PIN
entry to assign this unit.
Press the 3 Key will bring up a screen with two options.
Use the numeric Keys to choose an option.
Choosing an option will bring up the first screen for that
option.
Press the 1 Key will bring up a screen with three actions.
Use the numeric Keys to choose an action.
Press the 1 Key opens a window to enter a selection number to view data.
Press the 2 Key moves back to the previous selection number to view its data.
Press the 3 Key moves forward to the next selection number to view its data.
Use the center section of the OK Key to lock in the new number.
Press the X Key moves back to the Planogram Management Menu.
When a selection number is entered or scrolled to, a screen will come up listing the following data about
that selection.
A. The name of the product, if defined.
B. The Universal Product Code.
C. The currently set price for the product.
Press the 2 Key will bring up a screen with four actions.
Press the 1 Key opens a window to enter a selection number
to view data. Press the 2 Key opens a window to enter a
UPC number to view data. Press the 3 Key moves back to
the previous selection number to view its data. Press the 4
Key moves forward to the next selection number to view its
data. Use the center section of the OK Key to lock in the
new number. Press the X Key moves back to the Planogram
Management Menu.
Entering an Engineering code of 4,4,4,4. will bring up a screen similar to the Operator service screen.
Planogram Management
1) Planogram Audit >
2) Edit Planogram >
Planogram Audit
1) Selection code
Undefined
Product
Picture
UPC 101
$0.05
2) Previous Next (3
Edit Planogram
1) Selection Code 101
Undefined
Product
Picture
UPC 101
$0.05
2) UPC 101
3) Previous Next (4
To Next Page
