BevMax_Media_Programming_10_6_10 Page 91 of 106
08/15/2013
Check, repair, or replace switch
or harness. Problem solved?
YES NO
Replace I/O
Control board.
Y Home On message with XY all the way
to the home position to the bottom left.
Does Y motor run?
YES NO
Check, repair, replace
harness. Problem solved?
YES NO
Replace I/O
Control board.
Check belt
and pulley.
Is the Y Home
message on?
YES NO
Do a Vend
Test with
Door Closed.
“On” showing = a
switch or ground
wire issue.
“Off” showing
= a mechanical
obstruction.
NO YES
Check & replace Y
motor. Problem solved?
YES NO
Y Motor Failure = In Test Menu, Platform
Movement, is Y Home message?
ON OFF
Manually move cup to A9 and
pull top door switch out.
Press the “F” key. Picker Cup goes
to the home position?
YES NO
Manually activate the switch
and message cycles on and off.
YES NO
Back to top
of page.
To Next Page
Loading...
