User Manual
C O PYRIG HT ©2016 C reatComm Technology
Fig ure 7-29 VLAN S ettings
Bridge function is needed to use together with VLAN. As show below, we add VLAN 10
on port eth0 and ath0, they are eth0.10 and ath0.10
Fig ure 7-30 Add VLAN ID
Then we create a new interface and put
eth0.10 and ath0.10
into the s ame b rid ge in
N etwo rk->Interfaces page as shown below.
To Next Page
Loading...