Crestron CCS-UC-1 - Page 17

Configuration Guide – DOC. 7991A CCS-UC-1: Secure SIP Endpoint with Cisco UCM 11.0
•
13
6. In the
Additional Options
section, configure the
Request Format
. PKCS10 was
used in this example.
7. Click
Submit
.
Certificate Authority: Install certificate
8. Click
Install this Certificate
.
9. Export this certificate from the certificate store
Certificate Authority: Export Device Certificate
The certificate should be exported as a
sip_cert.pfx
with the following parameters.
• The option to export the private key.
• The certificate should have a .PFX extension.
• A password. Enter this same password when importing this SIP certificate
on the Crestron Mercury device.