Crestron CCS-UC-1 - Cisco UCM Media Termination Point Configuration

42
•
CCS-UC-1: Secure SIP Endpoint with Cisco UCM 11.0 Configuration Guide – DOC. 7991A
!
!
sip-ua
crypto signaling remote-addr 10.80.25.2 255.255.255.255 trustpoint
CrestronCFB
!
!
!
gatekeeper
shutdown
!
end
Cisco UCM Media Termination Point Configuration
A Media Termination Point utilizing the Cisco UBE resources was configured.
1. Select
Media Resources
>
Media Termination Point
.
2. Click
Add New
.
Cisco UCM: Add Cisco IOS Enhanced Software Media Termination Point
3. Select
Media Termination Point Type
*:
Cisco IOS Enhanced Software Media
Termination Point
4. Configure
Media Termination Point Name*:
SRTP-MTP was used in this example.
This is the same name as that configured on the Cisco UBE.
5. Configure
Device Pool
: Default.
6. Check the
Trusted Relay Point
check box.