Crestron CCS-UC-1 - Introduction; Audience; Topology

Configuration Guide – DOC. 7991A CCS-UC-1: Secure SIP Endpoint with Cisco UCM 11.0
•
1
CCS-UC-1: Secure SIP Endpoint with
Cisco Unified Communications
Manager 11.0
Introduction
This configuration guide describes the necessary procedure to configure a Crestron
Mercury™ device, in a secure mode, to register to the Cisco
®
Unified Communications
Manager as a basic AS SIP endpoint.
Audience
This document is intended for users attempting to configure and use the Crestron Mercury
devices as secure SIP endpoints registering to the Cisco Unified Communications Manager
(Cisco UCM).
Topology
The network topology for the Crestron Mercury endpoint to interop with the Cisco UCM is
shown below.
Secure SIP Endpoint Integration with Cisco UCM - Reference Network