Crestron CCS-UC-1 - Configure the End User

16
•
CCS-UC-1: Secure SIP Endpoint with Cisco UCM 11.0 Configuration Guide – DOC. 7991A
Configure the End User
To configure the end user, follow this procedure:
1. Navigate to
User Management
>
End User
.
2. Click
Add New
. The End User configuration window appears.
Cisco UCM: End User Configuration
3. Configure
User ID
: Enter a unique end user identification name. Two users were
configured for this example for the Crestron Mercury devices: Crestron
Mercury_2600 and Crestron Mercury_2602.