Crestron CCS-UC-1 - Cisco UCM Conference Bridge Configuration

Configuration Guide – DOC. 7991A CCS-UC-1: Secure SIP Endpoint with Cisco UCM 11.0
•
43
Cisco UCM Conference Bridge Configuration
An IOS conference bridge utilizing the Cisco UBE resources was configured as shown
below:
1. Select
Media Resources
>
Conference Bridge
.
2. Click
Add New
.
Cisco UCM: Conference Bridge Configuration
3. Select
Conference Bridge Type: Cisco IOS Enhanced Conference Bridge
.
4. Configure
Conference Bridge Name:
Crestronrtr was used in this example. This
name is the same as that configured on the Cisco UBE.
5. Configure
Device Pool
: Default.
6. Select
Device Security Mode
: Encrypted Conference Bridge.
7. Select
Use Trusted Relay Point
: On.