Crestron CCS-UC-1 - Page 21

Configuration Guide – DOC. 7991A CCS-UC-1: Secure SIP Endpoint with Cisco UCM 11.0
•
17
4. Configure
Password
: Enter any password. This same password will be entered on
the Crestron Mercury device against the SIP Server Password. The password in
this example was 123456.
5.
Confirm
Password
: Re-enter the same password configured above.
6. Configure the
Last Name
: Enter the end user last name.
7. Configure the
Digest Credentials
: Enter a string of alphanumeric characters.
8.
Confirm
Digest Credentials
: Re-enter the digest credentials entered above.
9. Click
Save
. All of the configured users are listed.
Cisco UCM: End Users Configured for All Crestron Mercury Devices