Crestron CCS-UC-1 - Page 37

Configuration Guide – DOC. 7991A CCS-UC-1: Secure SIP Endpoint with Cisco UCM 11.0
•
33
Cisco UCM: Add Crestron Device as Third-party SIP Device (3/3)
3. Select
Phone Type
as
Third-party AS-SIP Endpoint
.
4. Click
Next
.
5. Configure
MAC Address:
Enter the MAC Address of the Crestron Mercury device.
6. Select
Device Pool
as
Default
.
7. Select
Phone Button Template
as
Third-party AS-SIP Endpoint
.
8. Select
Media Resource Group List
MRGL_Secure as configured earlier was used
in the example.
9. Select
Owner User ID
as configured earlier from the drop-down menu. Crestron
Mercury_2600 was selected in this test for the first Crestron Mercury device, and
Crestron Mercury_2602 for the second Crestron Mercury device.
10. Select
Device Security Profile
as configured earlier from the drop-down menu.
TLSProfile was used in the example.
11. Select
SIP Profile
as configured earlier from the drop-down menu. Standard SIP
Profile Phones_Crestron
was used in the example.
12. Select
Digest User ID
as configured earlier from the drop-down. In this example,
Crestron Mercury_2600 was selected for the first Crestron Mercury device, and
Crestron Mercury_2602 was selected for the second Crestron Mercury device.
13. Click
Save
.
14. Add a
DN
to this phone. DN 2600 was configured for one of the Crestron Mercury
devices in this example. Similarly, DN 2602 was added to the other Crestron
Mercury device.