Configuration Guide – DOC. 7991A CCS-UC-1: Secure SIP Endpoint with Cisco UCM 11.0
51
3. Select
,
and
4. Click
.
Cisco UCM: Trunk Configuration Parameters (1/5)
5. In the
field, enter a unique SIP Trunk name and optionally, provide a
description. CUCM_CUBE_PSTN was configured in this example.
6. From the
drop-down list, select a device pool. Default was used in this
example.
7. From the
Media Resource Group List
, select MRGL_Secure_trk from the drop-
down menu.
8. Ensure that the
Media Termination Point Required
check box is unchecked.
To Next Page
