Crestron IV-CAMHK-12-SLVR-1B - Installation; In the Box

Product Manual — Doc. 9311C IV-CAMHK-12-SLVR-1B • 14
Installation
Use the following procedures to install the Hawk IV-CAMHK-12-SLVR-1B camera.
NOTES: Observe the following points.
l
Carefully lift the camera out of its packaging by holding it from the base. Holding it by the
PTZ camera assemblies may cause damage to sensitive mechanical parts.
l
Do not remove the rubber lens caps until the camera is mounted to avoid scratching the
lenses.
l
Only use the power supply included with this product to power it as non-specified products
may cause damage to the unit.
l
Do not operate the camera beyond the specified temperature and humidity limits. Operating
range of the camera is between 32°F - 104°F (0°C -40°C). Ambient humidity should be less
than 95%RH.
l
Do not remove any screws from the camera. There are no user-serviceable parts inside.
Contact Crestron True Blue Support if the camera is damaged or malfunctioning.
l
Do not aim the camera lens at the sun or extremely bright lights. Doing so can cause damage
to the image sensor.
l
Do not move the camera head manually. Doing so can cause damage to the camera and inner
gear systems. Do not carry the camera by the head; always handle the camera by the base.
l
Do not directly expose the camera to rain, water, or high moisture.
l
This camera is for indoor use only.
In the Box
Qty. Description
1 IV-CAMHK-12-SLVR-1B, 1 Beyond Hawk™ Dual-Camera Speaker Tracking Solution, 12x Optical Zoom
Additional Items
1 IRRemote Control (2060159)
1 Power Supply, 12VDC @ 2.5A, 100-240V (2060156)
1 Power Cord (2060157)
1 Mini DIN-8 Pin to RS-232 Cable Adapter, 3 m (2060121)
1 1Beyond Wall Mount Shelf, IVA-WMT-SHELF-HK-1B (2060163)
6 Mounting Screws (2060162)