Crestron IV-CAMHK-12-SLVR-1B - Access Video Feeds; PTZ Movement

Product Manual — Doc. 9311C IV-CAMHK-12-SLVR-1B • 44
Access Video Feeds
Proceed to the Main View tab to monitor the video feeds and begin setting up the tracking parameters.
In the Camera List, right-click on the camera name and select the desired stream:
l
Close Up (1) - PTZ 1
l
Panorama (1) - Reference
l
Close Up (2) - PTZ 2
l
Panorama (2) - Output
Up to four streams can be displayed at the same time.
PTZ Movement
Use the PTZ Lens arrow buttons to control the camera position and direction the camera's lens is
facing.
To select the camera for control, first add it to the multiview section as described in
1BeyondCameraManager Software Configuration on page 32, and then select the video stream of the
desired camera.
PTZControls
l
Press the plus (+) or minus (-)button next to Zoom to zoom the camera in or out.
l
Press the plus (+) or minus (-)button next to Focus to increase or decrease the camera focus.
l
Press the plus (+) or minus (-)button next to Iris to increase or decrease the camera brightness.
l
Use the Iris control to adjust exposure compensation by adding or subtracting exposure stops to
or from the camera's autoexposure value. Select Iris Reset to reset the camera's exposure
compensation.
NOTE: By default, 1 Beyond cameras are configured to retrigger autofocus every time the
camera is moved.