Crestron IV-CAMHK-12-SLVR-1B - Inquiry Commands

Product Manual — Doc. 9311C IV-CAMHK-12-SLVR-1B • 68
Command Set Command Command Packet Comments
CAM_Memory Reset 8x 01 04 3F 00 pp FF pp: Memory Number (=0 to 255)
Corresponds to 0 to 255 on the
Remote.
Set 8x 01 04 3F 01 pp FF
Recall 8x 01 04 3F 02 pp FF
SYS_Menu Off 8x 01 06 06 03 FF Turns off the menu screen.
CAM_IDWrite 8x 01 04 22 0p 0q 0r 0s FF p,q,r,s: Camera ID (=0000 to
FFFF)
IR_Receive On 8x 01 06 08 02 FF IR receiver On/Off
Off 8x 01 06 08 03 FF
Information
Display
On 8x 01 7E 01 18 02 FF Operation status display On/Off
Off 8x 01 7E 01 18 03 FF
Pan‐tiltDrive Up 8x 01 06 01 VV WW 03 01 FF VV: Pan speed 0 x01 (low speed)
to 0 x18
(high speed)
Down 8x 01 06 01 VV WW 03 02 FF
Left 8x 01 06 01 VV WW 01 03 FF
Right 8x 01 06 01 VV WW 02 03 FF WW: Tilt Speed 0 x 01 (low
speed) to 0 x14
(high speed)
UpLeft 8x 01 06 01 VV WW 01 01 FF
UpRight 8x 01 06 01 VV WW 02 01 FF
DownLeft 8x 01 06 01 VV WW 01 02 FF YYYY: Pan Position
DownRight 8x 01 06 01 VV WW 02 02 FF
Stop 8x 01 06 01 VV WW 03 03 FF ZZZZ: Tilt Position
AbsolutePosition 8x 01 06 02 VV WW
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
RelativePosition 8x 01 06 03 VV WW
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
Home 8x 01 06 04 FF
Reset 8x 01 06 05 FF
Pan‐tiltLimitSet LimitSet 8x 01 06 07 00 0W
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
W: 1 UpRight 0: DownLeft
YYYY: Pan Limit Position
ZZZZ: Tilt Position
Inquiry Commands
Inquiry Command Command Packet Inquiry Packet Comments
CAM_PowerInq 8x 09 04 00 FF y0 50 02 FF On
y0 50 03 FF Off (Standby)
y0 50 04 FF Internal power circuit error