Crestron IV-CAMHK-12-SLVR-1B - 1 Beyond Camera Manager System Requirements

21 • IV-CAMHK-12-SLVR-1B Product Manual — Doc. 9311C
9. Connect the HDMIcable from the Blackmagic Design Micro Converter SDI to HDMI 3G HDMIOUT
port to the HDMIINPUTport on the Inogeni 4KXUSB3 converter.
10. Connect the USB 3.0 type-B cable to the Inogeni 4KXUSB3 USB 3.0-2.0 port. Connect the USB 3.0
type-A end of the cable into the UC-Engine or other compatible Zoom Rooms system.
NOTE:Ensure that the camera and the Blackmagic Design Micro Converter SDIto
HDMI3Gare receiving power as specified by the product requirements.
11. Select Inogeni 4KXUSB3 as the camera source in Zoom Rooms.
The 1 Beyond Hawk camera will now have full compatibility with Zoom Rooms software.
1 Beyond Camera Manager System
Requirements
Ensure the host computer running the 1 BeyondCamera Manager software meets the following system
requirements.
l
Windows® 10 OSor later
l
Dual-core processor
l
4GB (or greater)memory
l
1GB(or greater)storage
l
Ethernet or Wi-Fi™ Network connection to the local network