Product Manual — Doc. 9311C IV-CAMHK-12-SLVR-1B • 30
5. Check Listen to this device which will enable outputting your conferencing audio to both the third-
party conferencing speakers and the camera.
6. Select the desired audio device or speakers in the Playback through this device drop-down menu.
7. Once complete, make sure to set the audio output of your conferencing codec to Headphones or
Line Out.
Setup Using VB-Audio® Voicemeeter Software
If the PC does not offer Stereo Mix, you can achieve the same functionality using the free VB-Audio®
Voicemeeter software.
1. Install and open Voicemeeter.
Voicemeeter can be downloaded at vb-audio.com/Voicemeeter/
2. Locate the A1 and A2 drop-down menus.
A1: Select the conferencing audio device
A2: Select the headphone/line output of the computer.
To Next Page
Loading...