57 • IV-CAMHK-12-SLVR-1B Product Manual — Doc. 9311C
To correct audio positioning:
1. Have someone speak in the center of the room, ideally in the center of the frame, and observe
where the vertical blue bars for their audio location appear. In the example above the audio is
skewed slightly to the right.
2. Use the directional buttons to correct the location of the blue bars. While the person in the room
continues to speak, click the directional buttons slowly and observe the change in location of the
blue audio bars.
There may be a slight delay between making adjustments and the adjustments to be reflected
visually.
3. Line up these bars as close as possible to the center of the face of the person talking. Once
completed, click Return and Save to save your adjustments.
NOTE: Be sure to verify that audio positioning is accurate around the entire room before
saving.
Monitor RTSP Streams
The RTSP IP video streams that are being broadcast by the camera can also be previewed and
monitored in third-party apps like VLC Media Player® software. The following example demonstrates
how to access the streams in the VLC® player.
1. Launch VLC player and click Media > Open Network Stream.
To Next Page
Loading...