Crestron IV-CAMHK-12-SLVR-1B - Configure Camera Settings

35 • IV-CAMHK-12-SLVR-1B Product Manual — Doc. 9311C
Configure Camera Settings
Once a camera has been added to the 1 BeyondCamera Manager software as described in Device
Management, select Settings to configure general settings for the camera.
Camera Manager - Settings Button
Selecting Settings opens the Camera Configuration dialog box, which provides access to many of the
camera's system settings.
Camera Configuration Dialog Box
The numbers in the preceding image correlate with the following functions.
1. Upgrade:Select this tab to upgrade the firmware on the camera.
2. Network:Select this tab to change the camera's network settings (similar to the Modify Netinfo
function in the Device Management tab).
3. Streaming:Select this tab to customize the camera's IPvideo streams. The bit rate and encoding
level of each stream can be adjusted manually.
4. RTMP:Select this tab to enter up to 4 URLs or IPaddresses that can receive video streams from
the camera.
5. UN/PW:Select this tab to change the camera name, to set authentication credentials for the
camera, and to change the system time.
6. Protocol:Select this tab to configure the camera to be operated from a control device (such as a
Crestron® touch screen).