7 • IV-CAMHK-12-SLVR-1B Product Manual — Doc. 9311C
Features
Refer to the following sections for more information on the features provided by the Hawk
IV-CAMHK-12-SLVR-1B camera.
Key features include:
l
Automatically tracks, frames, and switches between participants using voice and facial detection
l
Clean switching with broadcast-style cuts
l
Side-by-side dialog mode captures multiple participants in conversation
l
Intended for spaces up to 25ft from the participants
l
Smooth tracking and quiet operation
l
High quality video supporting resolutions up to 1080p60
l
Compatible with a variety of audio solutions
Participant Tracking
The IV-CAMHK-12-SLVR-1B uses voice and facial recognition to automatically switch to a shot of the
active speaking participant. With production-style switching, the IV-CAMHK-12-SLVR-1B allows remote
participants to follow an in-room conversation without excessive camera switching.
Third Party Microphone and Speaker Support
The camera works with a variety of microphones and audio speakers and offers an echo cancel audio
input. Just add your favorite microphone and route the audio to the camera for echo cancellation.
High-Quality Video
A high quality Sony Exmor® CMOS sensor enables the camera to output up to 1080p60 resolution video
via the 3G-SDI or HDMI® ports. The IV-CAMHK-12-SLVR-1B works well in low light and in front of bright
screens.
Conferencing Compatibility
Optimize video conferencing, recording, or streaming by using the 1 Beyond Hawk camera camera with
Microsoft Teams®, Zoom Rooms™, Cisco WebEx®, MediaSite®, or Panopto®. output.
Preset Switching
Up to 256 pan, tilt, and zoom combination presets can be configured. The camera will move to the
selected preset point. A quiet, fast motor (120°/s pan speed) sets camera angles quickly.