Product Manual — Doc. 9311C IV-CAMHK-12-SLVR-1B • 46
To access the camera’s tracking properties, click Settings. This opens the settings panel and shows a full
view of the wide-angle with the Tracking Zone shown as a green rectangle.
Set the Tracking Zone
The camera detects motion within the tracking zone of the wide-angle lens. The camera uses the
tracking zone to detect faces with the PTZ lens. Limit the tracking zone to the presentation area to
prevent false motion triggers.
NOTE:The camera does not auto-save settings. Save frequently during the camera setup process.
To draw a Tracking Zone:
1. Click Tracking in the Zone settings panel. The cursor will move into the video frame.
2. Hold the left mouse button down, then drag the mouse to draw the Tracking Zone. Ensure that
the Tracking Zone contains the entire area where participants will be situated.
3. Let go of the left mouse button when the Tracking Zone is drawn over the participant space.
4. Click Save to store the Tracking Zone to the camera.
To Next Page
Loading...