Crestron IV-CAMHK-12-SLVR-1B - Basic 2 Tab

Product Manual — Doc. 9311C IV-CAMHK-12-SLVR-1B • 54
To draw a Tracking Zone:
1. Click Tracking in the lower half of the settings panel. The cursor will move into the video frame.
2. While holding down the left mouse button, drag the mouse to draw the tracking zone.
3. Let go of the left mouse button to release the cursor from the video frame.
4. To correct a Tracking Zone, click Tracking to draw a new zone.
5. Once the Tracking Zone is set, click Save to store the setting in the camera’s memory.
Basic 2 Tab
The Basic 2 tab contains settings that influence the camera’s tracking behavior and helps adjust it to the
room’s environment.