Crestron Isys
TPS-2000L 5 Inch Lectern/Wall Mount Touchpanel
“Open” Window
5. Select the VT Pro-e (vtz) file and click Open. The transfer will
complete automatically.
Firmware Upgrade
A firmware upgrade file has the
extension .csf.
To take advantage of all the TPS-2000L features, it is important that the unit contains
the latest firmware available. Therefore, please check the Crestron website
(http://www.crestron.com/downloads/software_updates.asp) for the latest version of
firmware. Not every product has a firmware upgrade, but as Crestron improves
functions, adds new features, and extends the capabilities of its products, firmware
upgrades are posted. To upgrade the firmware, complete the following steps.
1. Make sure that “Communication Settings” that begins on page 30 has
been performed.
2. As shown after this step, select File Transfer | Update Touchpanel
Firmware from the Viewport menu.
File Transfer | Update Touchpanel Firmware Command
3. As shown after this step, select the NET ID of the TPS-2000L
touchpanel and then click OK. The “Open” window appears (refer to
the subsequent graphic).
Operations Guide – DOC. 5972A 5 Inch Lectern/Wall Mount Touchpanel: TPS-2000L • 35
To Next Page
Loading...
Need help?
General
