38 • TSR-310: Handheld Touch Screen Remote Supplemental Guide – DOC. 8226D
Status
Click the Status tab on the top left of the configuration interface to display selections
for viewing the status of device, system, and network settings.
Click on a selection name to expand the selection. If the selection is expanded, click the
selection name again to collapse the section.
Status Tab Selections
Each selection is described in the sections that follow.
Device
Click Device to view device information.
Status Tab - Device
The following Device information is displayed:
• Model: The TSR-310 model name
NOTE: If the TSR-310 is in Performance UI mode, the model name reports as
"TSR-310-P." If the TSR-310 is not in Performance UI mode, the model name
reports as "TSR-310."
• Firmware Version: The firmware version loaded onto the TSR-310
• Serial Number: The TSR-310 serial number
Click + More details at the bottom of the Device tab to display an expanded section that
shows additional TSR-310 information (for Crestron internal use only). If
+ More Details
is selected, click
- Less details to collapse the section.
To Next Page
Loading...
