Crestron TSW-70 Series User Manual

140 • TSW-70 Series Product Manual — Doc. 8550E
Local Configuration
Refer to the following sections for information about configuring the device locally using its
built-in setup screens.
Access the Setup Screens
The setup screens enable basic configuration prior to regular operation of the touch screen.
NOTE: The TSW-570P 5 in. portrait touch screen provides the same setup screens that are
described in this topic, but the appearance and layout of the screens have been modified for
portrait orientation.
To access the touch screen's built-in setup screens during regular operation, place five fingers on
the display and hold for 15 seconds.
The main Setup screen is displayed (TSW-1070 shown).
TSW-1070 Setup Screen
The Setup screen shows the IP address and hostname of the touch screen and provides the
following configuration selections:
l
Buttons for Ethernet setup, IP table setup, audio setup, display setup, standby timeouts,
application selection, Wi-Fi® network setup, diagnostics, Bluetooth® beacon configuration,
and the virtual toolbar (model dependent).
l
Abuttonto toggle system messages on or off
l
An About button that provides information about the touch screen.

Crestron TSW-70 Series Specifications

General

Brand	Crestron
Model	TSW-70 Series
Category	Touch Panel
Language	English