Crestron TSW-70 Series - Select an Application

To Next Page

To Previous Page

Product Manual — Doc. 8550E TSW-70 Series • 123

Select an Application

The touch screen ships with various built-in applications. An application may be selected from

the default project that ships with the touch screen.

NOTE:Applicationscan be selected and configured from the device setup screens or from the

web configuration interface at any time. For more information, refer to Application Selection

(on page213).

To select a touch screen application:

1. Tap Touch Here to Enable a Specific Application on the device splash screen. Refer to the

first image in TSW-770-GV and TSW-1070-GV Installation (on page116).

2. Select the desired touch screen application from the Choose Application Below menu that

is displayed.

3. Click Confirm. The touch screen reboots to display the user interface for the selected

application.

If a custom user project will be used, tap User Project. Custom user projects can be uploaded

using the web configuration interface or Crestron Toolbox software.

Other manuals for Crestron TSW-70 Series